How are plating lines categorized?

Manual Plating Line

Manual plating line is suitable for precious metal plating, such as nickel plating, silver plating and gold plating. The manual plating production line is designed with flexible layout and small footprint, which can have 2 to 3 processes at the same time, and can satisfy the plating process of many kinds of parts.

Semi-automatic Plating Line

Semi-automatic plating production line is suitable for batch production and mass production of precision electronic and small hardware parts, with large output value and good economic benefits. The plating production line is set up in the production line on the guide rail, the car running on the guide rail so as to transport the control in the plating tank for processing, the workers hand-control car electric button for operation, semi-automatic plating production line in the design of the design of the running speed of the car and hooks have been calculated, the number of workpieces and the area of the production of the production of the beat as well as the process parameters, so that the quality of the product produced by the product is stable, good consistency, high output, the design of the load factor of up to 85%! More than 85% load factor! Semi-automatic line is the mainstream equipment in the current domestic electroplating production line due to the strong adaptability, but with a higher rate and capacity.

Full-automatic production line

Automatic plating production line is according to a certain plating process requirements of the plating tank, plating lifting and transportation devices, electrical control devices, power supply equipment, filtration equipment, testing instruments, heating and cooling devices, air mixing equipment, etc., combined into one, through mechanical and electrical devices to automatically complete the plating process required by the entire process, high production efficiency, product quality and stability.

Full-automatic plating production line is suitable for single product and large output products, such as aluminum alloy automobile wheel shells or bicycle rims, with these products plating automatic production line is designed according to the size of the product and the output, so there is very suitable for the product loading and relatively fixed action beat, in the plating solution management is strict and the action of the program after the programmed, you can continuously plating automatic production. The control system of the automatic plating production line adopts PLC control machine, which can carry out automatic control after the determined process flow is programmed and inputted into the computer.

Plastic Plating Production Line

Plastic plating is widely used in industries such as automobile decorative parts, cell phone decorative parts and signs, etc. With the expansion of the application of engineering plastics, the scope of plastic plating is also expanding, which is mainly applicable to the plating treatment of ABSPC plastic products.

First of all, the basic surface of the plastic using a specific treatment method to obtain a layer of metal, so that both the advantages of the plastic box metal, both plastic metallization, and then conventional plating.

Metallized plastic to overcome the many defects of the plastic itself, with good solvent resistance, corrosion resistance, abrasion resistance, light resistance, thermal conductivity, with a good metal appearance, plating hardness and other characteristics.

Ring-shaped production line

Ring vertical lifting plating line is very different from ordinary plating line structure, the traverse and lifting of the workpiece is no longer for a single tank, but the whole line of the hanging device and workpiece at the same time, the workpiece of a single tank rises, traverses, and descends into the next tank, the workpiece of the plating tank and the multi-bit potion tank is in the tank to make a continuous movement, without lifting and lowering.

The traverse of the workpiece is realized by the motor-driven chain, the chain drags the track, the lifting of the workpiece is also driven by the motor-driven chain, the chain drives the lifting platform, holding the slider, the boom, the hangers and the workpiece for up and down movement, all the actions and safety protection are controlled by the inductor, through a certain set of settings, you can realize the workpiece more than one set of procedures, air drops, jumping troughs, drop to a high level, and other special requirements.

Ring vertical lifting plating line is applicable to a very wide range of products, mainly used for a variety of small parts, large production capacity, a single process, including plastic plating, the realization of nickel-chromium plating, copper plating, ABS copper-nickel-chromium plating and other plating requirements.