Features:
●This kind of plating production line has short cycle,large production and running speed is adjustable, and is equipped with buffer device, make the plating parts clamping stability.
●Controlled by PLC, frequency converter and photoelectric switch,accurate positioning.
●High strength and resistance to acid and alkali belt, reduce the oil
Main parameters:
●Production cycle: 25 - 35 sec/hang
●The largest plating: 800 * 600 mm
●Working conditions: can work continuously 24 hours a day
●Biggest hoisting: 30 kg/hang
●Hoisting height: 1.2-1.2 meters
1. Adopting a double chain track drive with circular motion, the car is slid on the mechanical arm track by four wheels, and rises and falls up and down to reach the electroplating line for replacing the electroplating process. Each cycle of the parts completes all processing procedures.
2. This line adopts hydraulic transmission or motor transmission, which runs smoothly and reliably; Adopting a computer automatic control system, the PLC programmable controller controls the entire line, with simple and accurate operation actions; The speed and time can be adjusted arbitrarily according to various technical requirements of the electroplating process.
3. Equipped with buffering devices and stable clamping of plated parts; Greatly reduce the number of operators and improve the quality of electroplating. Suitable for high production efficiency, large output, and can hold products weighing less than 80 kilograms in one pallet.
中文
English
